This is the Lauriel pattern by Ysolda Teague. I fell in love with the pattern after lurking Tasia’s golden version. I used Cascade 220 sport (the color in these photos is definitely off; the swatch picture on my Ravelry page is much closer to the true color) and even bought me some of them fancy flexi-cable bamboo needles. I learned two new techniques for this sweater – a super stretchy bind off (my bind offs are always soo tight, no matter how much I go up in needle size. This method is awesome!) and Magic Loop for knitting the sleeves. I actually really enjoyed knitting it, although knitting the button bands almost broke my brain. I have no idea why the instructions were so bad for that part, but they were TERRIBLE. I spent about 3 hours on just one of the bands – I know this because I watched 4 episodes of Breaking Bad during the harrowing process.

So what’s the problem? Well, it’s too fucking big! I mean – holy shit, look at that sleeve length! I can’t cuff the sleeves back. I mean, I could, but there is a lace detail right above the cuffs and it would suck to cover that. Actually, the sleeves are the least of my problem. The entire thing is just huge huge huge. It swallows me, I look like a kid playing dress-up in her mom’s clothes. I know it looks semi-ok in these pictures, but trust me on this. This sweater is way too big, and I can’t wear it.

So where did I go wrong? I knit it correctly as indicated by the pattern – knitted my little gauge swatch (actually, I knit 3, just so we’re clear here), properly blocked it, checked my gauge frequently as I knit. So my knitting itself isn’t the error.

First of all, I admit that I knit the wrong size. The pattern has you knit by your underbust measurement, so I went with the 30″ since that’s what I measured at. Unfortunately, I must have measured wrong because I was checking that shit the other day and my underbust is actually closer to 28″. FACK. Even then, this thing is too huge.

I also suspect that this pattern simply runs big. Go look at Tasia’s sweater and notice that she said the sweater ended up very loose? Uh huh. Shoulda heeded her advice right there. I’ve actually now discovered, upon actually researching, that a lot of people have reported the thing problem – specifically in the bust/shoulders area. Which, yeah, that’s exactly the issue with mine. The shoulders droop down past my shoulders, the underarms are at least a couple of inches below mine, and the bust just swallows me.

Here I am pointing my finger at where my actual underarm is. Look at how low the sweater goes! The arms are huuuge on me – and I don’t have pencil thin arms, y’all!

The back is really a shining example of this sweater being too big.

Yep.

Just for the record, this is how it is *supposed* to fit. I originally thought I might be able to just whip up the side seams with a backstitch, but the underarms are so low that I can’t do that. Wah.

Anyway, the knitting itself is really pretty:

(fuck that button band, forreal tho)

So yeah. I’m pretty bummed – I spent a little over 2 months knitting this (not to mention the money I spent on the yarn, pattern, and new needles) and I just can’t wear it. That’s the sucky part about knitting – you never really know the full extent to the fit until it’s finished and blocked. I’m afraid I can’t salvage this one.

That being said, I don’t regret knitting it. It was a fun pattern to work with, and I learned some fun new techniques. I am considering selling it for , I dunno like $50, just to recoup my costs. Anyone interested? The bust is 35″, waist is 31″ (with lots of stretch) and the length from shoulder to hem is 20″. The sleeves are also 20″ (underarm to end of cuff). I didn’t bother to sew the buttons or snaps on as I’m kind of over this sweater; I’m sure y’all understand. It has been finished and blocked, though. The sweater has found a new home! Thank you everyone for your interest

Sooo… what have you failed at lately? Let’s commiserate!

Check out my new Thurlows! We are up to six pair at this point, so I understand if you are sick of this pattern now, but y’all gotta understand that I am just in love and we’re still honeymoonin’ strong over here. My TNT! My one true love! The Thurlow!

You’ll notice these are a bit different, in fact they went on a bit of a diet! As much as I loved those nice flared legs in the original pattern – I’m a skinny girl at heart, at least as far as my pants are concerned I’ve hemmed and hawwed for a few months now on how to properly execute the slim-down. I probably should have hemmed and hawwed just a little bit more because honestly, these aren’t exactly my best attempt! Blame it on a combination of bad pattern, er, combinations (which I’ll get to in just a second, so put your hands down!), as well as a tricky fabric choice. It was a learning curve, that’s for sure!

To get the legs skinny, I ended up merging the top of the Thurlow pattern with the legs of the Clover pattern. One issue I noticed right away with my tracing – and you probably notice this right away in these pictures – was that the grainlines for each pattern were TOTALLY different. Just skewing in completely different directions. So which grainline was I supposed to choose? I took a wild guess and stuck with the Thurlow grainline. Also, SPOILER: I picked wrong; look at those crazy wrinkles and folds and off-grain madness going on – the side seams are trying to so hard to wrap around my legs! WAH! First lesson learned here: pay attention to those grainlines. They need to go straight up and down the middle of the legs, which is why each pattern was so different.

Mistake #2 came from my fabric choice. I really like this fabric – it’s a very soft, wool-blend felt that I picked up at the Vogue store while I was in Chicago last year. It was super cheap, feels great against the skin, and I love the color/fuzzy soft texture. However, it has waaaaay too much stretch for this pattern. I don’t know if that saved the grainline fiasco or made it worse than ever, but the massive amounts of stretch definitely contribute to how these pants hang off my legs. Also, the sizing was horribly off, due to the stretch. I kept basting and taking in the sides – I took over 1″ off each side seam. The welt pockets are now too close together as a result; and the pants are still a little loose. Didn’t think that one through, I’m afraid! Second lesson learned: no stretch on these pants, at least not without sizing down first.

Here’s a better picture of my fails. Wrinkles all up and down the backs of the legs, and the welt pockets are sitting in a weird spot. Oh well!

I don’t think they’re all bad, though. They’re quite comfortable, thanks to the stretch and how soft the fabric is. And honestly – is the fit that much worse than RTW? I dunno.

NOPE, NEVERMIND, THAT’S PRETTY BAD. HAHAHA!

I plan on revisiting these again, as I have not yet satisfied my need for skinny pants. I think I’ve got a better grasp on the grainline issue, but if anyone has words of wisdom they’d like to share – let’s hear it!

And yes, I still plan on wearing these. In all their wrinkly, off-grain glory.

So here it is – the Amy Butler Sweet Harmony handbag FAIL.

It doesn’t look too bad at the first glance – kind of lumpy, and the handle is doing something weird, but that can be overlooked, y/y? I must admit that this bag is definitely a Monet – from far away it looks ok, but up close it’s just a big ol’ mess.

Let’s look at the other side!

Oh, that’s nice – what the hell is that giant dent over the cell phone pocket? What the hell is the cell phone pocket even doing? And look at the handle – that seam is supposed to be at the bottom, not turned up to the side.

Here, I have stuffed some fabric (isn’t that fabric delightful, btw?) in to show you what it looks like closed. WHAT THE EVERLOVING FUCK.

I’m going to take a break here and explain why this bag failed. First of all, I definitely used the wrong fabric and interfacing. The pattern calls for quilting cottons or home decorator fabric… and I used some squishy wool coating (very similar to wool crepe). When I was interfacing my pieces, I realized I didn’t buy enough fusible (I went by the pattern directions, but good ol’ Amy didn’t bother to mention that her suggested fusible yardage was for 44″ wide, not the standard 22″ wide), so a lot – like, half – of the pieces are interfaced with sew-in interfacing. This does NOT provide enough structure, especially coupled up with that squishy-ass coating. Also, the coating snags quite easily, which makes the whole thing look cheap and, well, shitty. Also, Amy Butler is totally onto me.

The next problem – and the biggest one, imo – is that I got way too frustrated with the bag and rushed through it as quickly as possible. I’m a pretty fast sewer, but I absolutely have my limits and when they are reached I have to stop because otherwise I start getting sloppy. This bag is a prime example of LT being sloppy – the seam allowances are crooked, the corners are fudged pretty badly, and the whole inside is just wack. Oh god, the inside LOL. Hold on, I want to show you the inside.

See where I didn’t clip the seam allowance at the curve? Or how about the fact that the lining does not fit in there at all? The whole thing is just… wrinkled and poochy. Ew.

Some more Bag Fail pictures:

This is what the bag looks like open – gap fail. You can also see where the interfacing & outer fabric are pulling away from each other.

The bottom is a special piece of work all on it’s own – I sewed the bottom panel on, realized I didn’t quite catch the fabric on one side, but instead of picking the stitches out like a normal person, I just hand stitched it together. Yeah, that looks real nice.

Here is the picture that makes the laugh the hardest.

Are you ready?

LOL IT DOESN’T EVEN STAND UP STRAIGHT WTF.

I will have you know that I actually carried this bag around over the weekend, despite hating every second of it. I carried it aaaall the way to Atlanta, and seriously considered leaving it behind every time we stopped in a store. I still don’t know what to do with it. I actually feel bad taking it to Goodwill. I might just throw it away (after I salvage the purse snaps, of course!) – it is that bad.

As an apology for making you sit through multiple pictures of something that looks like my cat threw up, here are some images of Landon & myself wearing furry hats at the H&M in Atlanta:

Anyone else have a sewing fail they want to share with the group? C’mon, it’s FUNNY.